Azusa Brakes

	Azusa Band Brakes [GO]
	Drums for 4-1/2" Band Brakes [GO]
	Drums for 4" Band Brakes [GO]
	Azusa Brake Locator [GO]

Azusa Band Brakes

[TOP]

Drums for 4-1/2" Band Brakes

[TOP]

Drums for 4" Band Brakes

[TOP]

Azusa Brake Locator

[TOP]

	4-1/2" Brakes [GO]
	4-1/2" Brake Drums - Machined [GO]
	4-1/2" Riveted Sprocket/Drum Assemblies [GO]
	4-1/2" Assemblies w/Riveted Hubs [GO]
	Azusa Brake Locator [GO]

4-1/2" Brakes

4.5" Brake Assemblies
Description	Part No.
Steel backing plate, 5/8" bore (*2)	2270S
Aluminum backing plate, 5/8" bore (*1)	2270A
Steel backing plate, 3/4" bore (*2)	2272S
Aluminum backing plate, 3/4" bore (*1)	2272A
Steel backing plate, 1" bore (*2)	2271S
Aluminum backing plate, 1" bore (*1)	2271A
Steel anchor backing plate, 5/8" bore (*3)	2208
Steel anchor backing plate, 1" bore (*3)	2269

Renewal Components
Description	Part No.
Lined Brake Shoes, Pair	2260
Actuator Arm* *options: left offset, right offset or straight	2263
Spring (2 required)	2264
Cam	8235
Lockwasher - Split	8302
Flat Washer	8304
Locknut for Cam, 5/16-18	8510

*Weights (approx. lbs.): 1 = .97; 2 = 1.35; 3=1.60

[TOP]

4-1/2" Brake Drums - Machined

Flanged drum has 6 holes on a 5-1/4" bolt circle. All are machined either "I.D." for brakes on this page or "O.D." for 4-1/2" Band Brakes. All drums have three sets of mounting holes: 3 and 4-hole on a 3.75" diameter bolt circle and a 4-hole to match the mini-hub pattern. *Specify machined surface either "-I.D." or "-O.D."

Description	Part No.
Drum, No Flange	2211-*
Drum with Flange	2213-*

[TOP]

[ Home ] [ Restoration Jobs ] [ "The Oberon" ] [ BRS ] [ FlightStar SC ] [ FlightStar Spyder ] [ IVOPROP ] [ Custom Motor Mounts ] [ Installations ] [ The HKS Engine ] [ About Us ] [ Contact Us ] [ Azusa Brakes ] [ Azusa Tires & Wheels ] [ Azusa Steel Wheels ] [ Tennessee Propellers ] [ Treetop Aeroplane ] [ Warp Drive ]